ADVA Optical Networking FSP3000 10TCC
The ADVA Optical Networking FSP3000 is an optical data transport solution. This connector can be used to monitor and control a 10TCC card.
About
The ADVA Optical Networking FSP3000 is an extensible chassis with multiple slots. Each slot can contain a different type of extension card. This connector is especially meant for the 10TCC card.
This connector requires an element of protocol "ADVA Optical Networking FSP3000" with the same polling IP to function. The purpose of that element is to retrieve the entity IDs of the different components on this card, i.e. channels. The entity ID is used in the SNMP OID in order to successfully retrieve data from this card.
All information is retrieved using the SNMP protocol.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. Deprecated. | - | - |
| 2.0.0.x [SLC Main] | Changed element topology. A different element is now used to retrieve the entity table of all cards from the device. | - | - |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | N/A |
| 2.0.0.x | All firmware versions |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 2.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
- Device address: Required. Format: "<chassis id>.<slot id>", e.g. "1.19".
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default value: public).
- Set community string: The community string used when setting values on the device (default value: private).
Usage
General
This page contains general information of the device, such as the name and temperature. Additionally, the most important statuses of the different channels that are managed by this card are available on this page.
Channel x page
The information of each channel is displayed on a separate page. Each channel contains at least the following parameters:
- Admin State
- Operational State
- Secondary States
- Facility Type
Some of the channels also display configuration parameters.
Embedded Web Server
Displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.