APC AP4423
The APC AP4423 is a rack-mount automatic transfer switch. This connector allows you to monitor and configure this device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 4.1.9 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector retrieves information from the device via SNMP. When you create an element, specify the following information:
SNMP Connection:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string needed to read from the device. The default value is public.
- Set community string: The community string needed to set to the device. The default value is private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element consists of the following data pages:
- Overview: Contains general information such as the load status, software version, serial number, etc.
- ATS Status: Displays status information for the automatic transfer switch, such as the communication status and the selected source.
- Configuration: Allows you to configure device settings such as the Voltage Sensitivity, Current Limit, Preferred Source and Front Panel Lockout.
- Input/Output Status: Displays the input sources and output banks with their load.
- Calibration: Displays the input phase calibration factor and the power supply calibration factors.