ATX Networks Transcend
This connector is intended for the monitoring of ATX's Transcend platform and its application-specific modules.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.a-5.0 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | ATX Networks Transcend - FRXC |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
Usage
General
This page contains system information parameters, such as the Software Version, Hardware Version, Model Name, and Serial Number.
Modules
This page contains the Modules Table. This table displays all the modules of the device.
Forward Receiver
This page contains the Forward Receiver Modules Table and Forward Receiver Lasers Table.
For each module in the Forward Receiver Modules Table, the Slot State indicates the status of the DVE, and the Remove Module button allows you to delete the DVE.
With the Forward Receiver Auto Remove parameter, you can enable or disable the automatic removal of unequipped DVE modules.