AdvancedDigital ADV-6410
This connector monitors the activity of the AdvanceDigital ADV-6410 device.
AdvanceDigital ADV-6410 is an integrated receiver/decoder (IRD). It provides operators with ideal solution for multi receiving, descrambling, remultiplexing, and decoding operations.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.1.0.x | New SNMP tables and layout because of new firmware | - | - |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 34PA2046 |
| 1.1.0.x | 34PA600A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.1.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
Usage
General
The General page has some system parameters and device parameters like SNMP and MIB version, Inputs and Outputs .
On the Configuration subpage, you can configure the BISS and the Traps.
The Trap Events subpage displays the latest device events.
Tuner
On this page, you can check the status and the configuration of the tuner.
Decoder (Not Available in 1.1.0.x)
On this page, you can check the status and the configuration of the decoder.