Table of Contents

Advantech AMT MC 16R-250L12-000

The Advantech AMT MC 16R-250L12-000 is a monitoring and control panel for redundant Solid State Block Up-Converters (SSPBs). This connector can be used to monitor this device.

About

The monitoring and control panel is used for redundant high-power SSPBs, monitoring the status of two units in a redundant system and allowing control over the SSPBs. This device will monitor the slave SSPBs continuously, collecting and updating information as well as controlling the SSPBs as required, using the SC protocol.

Version Info

Range Description DCF Integration Cassandra Compliant
1.0.0.x Initial version No Yes

Product Info

Range Supported Firmware Version
1.0.0.x -

Installation and configuration

Creation

Serial Main Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Direct connection:

    • Baudrate: 9600
    • Databits: 8
    • Stopbits: 1
    • Parity: None
    • FlowControl: FlowControl specified in the manual of the device.

  • Interface connection:

    • IP address/host: The polling IP of the device.
    • IP port: The IP port of the device.

Usage

General

This page contains general information and control settings for the controller, and displays the overall status of the units connected to it. More specifically, it provides information about the unit Serial Number and the Units A, B and S Transmission Status.

Several buttons are available, which can be used to Reset Faults and to switch to Switch 1 or 2.

In addition, the Switch 1, 2 and 3 Alarm and Connection Status, the A/B Position Error and Path Status are displayed, as well as the unit Shroud Temperature, the PS1 and PS2 Voltage, and the Redundancy Status.

SSPB Unit A

This page displays information related to SSPB Unit A, such as the Unit A Status, Transmission and Mute/Unmute Status. It also contains the Unit A Transmission Power and Reflected Power, Frequency Shift, ALC Status and Value, Elapsed Time, Gain A and B, Low Power Threshold, Communication and Fault Status, Alarm Summaries, Reflected Power and Shutdown Status.

In addition, the page displays the Unit A Shroud and Hot Spot Temperature, P/S Voltage and Current, and the unit Serial Number, Software Revision Number, Version, Device Type, Power Class and Frequency Band.

Finally, you can also find the Unit A Reference Status, and the Unit A ALC Suspended, High, Low and Temperature Alarm here.

SSPB Unit B

This page displays information related to SSPB Unit B, such as the Unit B Status, Transmission and Mute/Unmute Status. It also contains the Unit B Transmission Power and Reflected Power, Frequency Shift, ALC Status and Value, Elapsed Time, Gain A and B, Low Power Threshold, Communication and Fault Status, Alarm Summaries, Reflected Power and Shutdown Status.

In addition, the page displays the Unit B Shroud and Hot Spot Temperature, P/S Voltage and Current, and the unit Serial Number, Software Revision Number, Version, Device Type, Power Class and Frequency Band.

Finally, you can also find the Unit B Reference Status, and the Unit B ALC Suspended, High, Low and Temperature Alarm here.

SSPB Unit S

This page displays information related to SSPB Unit S, such as the Unit S Status, Transmission and Mute/Unmute Status. It also contains the Unit S Transmission Power and Reflected Power, Frequency Shift, ALC Status and Value, Elapsed Time, Gain A and B, Low Power Threshold, Communication and Fault Status, Alarm Summaries, Reflected Power and Shutdown Status.

In addition, the page displays the Unit S Shroud and Hot Spot Temperature, P/S Voltage and Current, and the unit Serial Number, Software Revision Number, Version, Device Type, Power Class and Frequency Band.

Finally, you can also find the Unit S Reference Status, and the Unit S ALC Suspended, High, Low and Temperature Alarm here.

Improve this page