Advantech AMT PM 160-250W12-100
The Advantech AMT PM 160-250W12-100 connector is used for single high-power SSPAs, monitoring the status of one unit and providing control over the SSPA.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Direct connection:
- Baudrate: 9600 (specified in the device manual).
- Databits: 8 (specified in the device manual).
- Stopbits: 1 (specified in the device manual).
- Parity: No (specified in the device manual).
- FlowControl: No (specified in the device manual).
Interface connection:
- IP address/host: The IP address of the device.
- IP port: The IP port of the device.
Initialization
No extra configuration is needed.
How to use
The General page shows basic information about the control panel. Via the Unit Port Config page button, you can view information about the port configuration.
On the SSPA Unit A and B pages, you can find information about the SSPA Unit A and B such as the Transmission Status, Transmission Power, Shutdown Status, etc.