Anevia Viamotion Origin
The Anevia Viamotion Origin consists of a Streamer control panel. There is also a web interface to control the device.
This is a serial connector that will show the status of the different parameters of an Anevia Viamotion Origin.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Configuration
Connections
Serial Main Connection
This is a serial connector. The IP and port have to be configured during element creation.
SERIAL CONNECTION:
- Type of port: TCP/IP
- IP address: The IP of the device, e.g., 10.11.12.13.
- IP Port: The IP port of the device, 8080.
Initialization
When the element has been created, go to the General > Credentials page, and fill in the username and password for the device.
Usage
General Page
This page contains general information about the device, such as the system API version, CPU load, and free RAM.
On the Credentials subpage, the username and password for the device must be filled in, to make sure the connector can communicate with the device.
The Import/Export functionality is similar to the import and export functionality on the device web interface under System >Save/Load.
This page also contains a Reboot Server button.
Profiles Page
This page contains information about the Stream Adaptations and the Stream Adaptation Families. You can edit the Destination NPVR, Login, and Password of the stream adaptation here.
Live Channels Page
This page contains information about the Live Channels, including their Stream Adaptation Family. The number of Running Channels and Not Running Channels is also displayed.
Interfaces Page
This page contains a table with information about the interfaces of this unit.
Disks Page
This page contains a table with information about the disks of this unit.
HTTP Content Page
This page contains a table with information about HTTP content.
nPVR Table Page
This page contains a table with information about NPVR.
To edit an NPVR (start and end date and time only), click Edit and select the NPVR that you want to edit by Name.
To create a new NPVR, use the New NPVR button.
The table will only be polled if the toggle button NPVR Polling is set to Enabled.
Alarms Table Page
This page contains a table with information about Current Alarms