Arris CHP Max5000 - CHP-SMM-2

The CHP-SMM-2 card is an SNMP-enabled controller card for the Arris CHP Max5000 platform. This card works like a CHP-CMM-1 card in general, but allows access by SNMP. As a controller card, its main usage is to obtain the general information from other cards or elements contained in the platform. It is possible for a single SMM card to be connected to several CMM cards in order to control/mediate more than one chassis.

About

This is an SNMP connector, which uses SNMP polling to communicate with the physical devices.

Product Info

Range	Supported Firmware Version
1.0.0.x	1.0.6.0

Installation and configuration

Creation

This connector is used by DVE child elements that are automatically created by the connector Arris CHP Max5000, from version 1.0.0.1 onwards.

Usage

General

This page contains card-specific hardware information and configuration options. Names, Serial Number, Revisions and the generic hardware information can be seen and configured here.

Status

This page displays the general status of the card, which includes slot information, up time and alarming.

Specific card information can also be found here, namely the polling status, Firmware download status and Discovery Lockout.

Configuration

This page provides access to general configuration and actions, such as the Module Reset, Factory Default reset and Slot Reset for the relevant card. It's also possible to change the status of the Front Panel Lock, and to Blink the card's front status LED.

The page also contains specific card configuration options, such as Firmware Download, Download Configuration Files and USB Mode.

From version 1.0.0.3 onwards, you can also change some system settings, i.e. the Date/Time and Alarm Detection, as well as do a Software Reset.