Table of Contents

Axon ACP - GDB400

The GDB400 is a 3 Gb/s, HD, SD basic digital and/or analog audio de-embedder.

The Axon ACP - GDB400 connector can be used to display and configure information related to this device.

About

This connector is automatically generated by the connector Axon ACP.

There are different possibilities available for alarm monitoring and trending.

Version Info

Range Description DCF Integration Cassandra Compliant
1.0.2.x Change in export rules. Yes Yes
1.0.3.x Change in discrete display values. Yes Yes

Product Info

Range Supported Firmware Version
1.0.2.x 1416
1.0.3.x 1416

Installation and configuration

Creation

This element is automatically created by the parent element using the Axon ACP connector.

Usage

This element has the following data pages:

  • General: This page displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
  • Status
  • Local Audio
  • Video
  • Miscellaneous
  • Audio A
  • Audio B
  • Audio Z-Bit
  • Add-On A/B
  • Add-On C/D
  • Alarm Priority: This page displays the event messages of the card, i.e., special messages generated asynchronously on the card.

DataMiner Connectivity Framework

The Axon ACP connector supports the usage of DCF.

DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party connectors (for instance a manager).

Connectivity for this protocol is managed by the parent protocol Axon ACP.

Interfaces

Physical Interfaces

  • SDI Input: A single fixed interface of type input.
  • SDI Output 1: A single fixed interface of type output.
  • SDI Output 2: A single fixed interface of type output.
  • AUDIO Output 1: A single fixed interface of type output.
  • AUDIO Output 2: A single fixed interface of type output.
  • AUDIO Output 3: A single fixed interface of type output.
  • AUDIO Output 4: A single fixed interface of type output.
  • SYNAPSE Bus Output 1: A single fixed interface of type output.
  • SYNAPSE Bus Output 2: A single fixed interface of type output.
  • SYNAPSE Bus Output 3: A single fixed interface of type output.
  • SYNAPSE Bus Output 4: A single fixed interface of type output.

Virtual Interfaces

  • Multiplexer: A single fixed interface of type inout.

Connections

Internal Connections

When a DVE child element is created, the following connections are established:

  • Between SDI Input and SDI Output 1.
  • Between SDI Input and SDI Output 2.
  • Between SDI Input and Multiplexer.

Depending on the state of Local Output A1, the following connections are established:

  • CH-01: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-01".
  • CH-02: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-02"
  • CH-03: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-03".
  • CH-04: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-04".
  • CH-05: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-05".
  • CH-06: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-06".
  • CH-07: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-07".
  • CH-08: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-08".
  • CH-09: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-09".
  • CH-10: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-10".
  • CH-11: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-11".
  • CH-12: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-12".
  • CH-13: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-13".
  • CH-14: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-14"
  • CH-15: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-15".
  • CH-16: Between Multiplexer and AUDIO Output 1 with Connection Name suffix "A1 CH-16".

Depending on the state of Local Output A2, the following connections are established:

  • CH-01: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-01".
  • CH-02: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-02"
  • CH-03: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-03".
  • CH-04: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-04".
  • CH-05: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-05".
  • CH-06: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-06".
  • CH-07: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-07".
  • CH-08: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-08".
  • CH-09: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-09".
  • CH-10: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-10".
  • CH-11: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-11".
  • CH-12: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-12".
  • CH-13: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-13".
  • CH-14: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-14"
  • CH-15: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-15".
  • CH-16: Between Multiplexer and AUDIO Output 2 with Connection Name suffix "A2 CH-16".

Depending on the state of Local Output A3, the following connections are established:

  • CH-01: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-01".
  • CH-02: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-02"
  • CH-03: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-03".
  • CH-04: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-04".
  • CH-05: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-05".
  • CH-06: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-06".
  • CH-07: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-07".
  • CH-08: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-08".
  • CH-09: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-09".
  • CH-10: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-10".
  • CH-11: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-11".
  • CH-12: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-12".
  • CH-13: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-13".
  • CH-14: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-14"
  • CH-15: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-15".
  • CH-16: Between Multiplexer and AUDIO Output 3 with Connection Name suffix "A3 CH-16".

Depending on the state of Local Output A4, the following connections are established:

  • CH-01: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-01".
  • CH-02: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-02"
  • CH-03: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-03".
  • CH-04: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-04".
  • CH-05: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-05".
  • CH-06: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-06".
  • CH-07: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-07".
  • CH-08: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-08".
  • CH-09: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-09".
  • CH-10: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-10".
  • CH-11: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-11".
  • CH-12: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-12".
  • CH-13: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-13".
  • CH-14: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-14"
  • CH-15: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-15".
  • CH-16: Between Multiplexer and AUDIO Output 4 with Connection Name suffix "A4 CH-16".

Depending on the state of Add-On Output A1, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A1 CH-16".

Depending on the state of Add-On Output A2, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A2 CH-16".

Depending on the state of Add-On Output A3, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A3 CH-16".

Depending on the state of Add-On Output A4, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 1 with Connection Name suffix "A4 CH-16".

Depending on the state of Add-On Output B1, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B1 CH-16".

Depending on the state of Add-On Output B2, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B2 CH-16".

Depending on the state of Add-On Output B3, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B3 CH-16".

Depending on the state of Add-On Output B4, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 2 with Connection Name suffix "B4 CH-16".

Depending on the state of Add-On Output C1, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C1 CH-16".

Depending on the state of Add-On Output C2, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C2 CH-16".

Depending on the state of Add-On Output C3, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C3 CH-16".

Depending on the state of Add-On Output C4, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 3 with Connection Name suffix "C4 CH-16".

Depending on the state of Add-On Output D1, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D1 CH-16".

Depending on the state of Add-On Output D2, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D2 CH-16".

Depending on the state of Add-On Output D3, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D3 CH-16".

Depending on the state of Add-On Output D4, the following connections are established:

  • CH-01: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-01".
  • CH-02: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-02"
  • CH-03: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-03".
  • CH-04: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-04".
  • CH-05: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-05".
  • CH-06: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-06".
  • CH-07: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-07".
  • CH-08: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-08".
  • CH-09: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-09".
  • CH-10: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-10".
  • CH-11: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-11".
  • CH-12: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-12".
  • CH-13: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-13".
  • CH-14: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-14"
  • CH-15: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-15".
  • CH-16: Between Multiplexer and SYNAPSE Bus Output 4 with Connection Name suffix "D4 CH-16".