Table of Contents

Axon ACP - HAS20

The HAS20 is a high-definition 8-channel preset-based audio shuffler with 4 local AES/EBU inputs.

The Axon ACP - HAS20 connector can be used to display and configure information related to this device.

About

This connector is automatically generated by the connector Axon ACP.

There are different possibilities available for alarm monitoring and trending.

Version Info

Range Description DCF Integration Cassandra Compliant
1.0.2.x Change in export rules. Yes Yes
1.0.3.x Change in discrete display values. Yes Yes

Product Info

Range Supported Firmware Version
1.0.2.x 1415
1.0.3.x 1415

Installation and configuration

Creation

This element is automatically created by the parent element using the Axon ACP connector.

Usage

This element has the following data pages:

  • General: This page displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
  • Status
  • Settings
  • AES
  • Audio
  • Embedder
  • Embedder A
  • Embedder B
  • Alarm Priority: This page displays the event messages of the card, i.e., special messages generated asynchronously on the card.

DataMiner Connectivity Framework

The Axon ACP connector supports the usage of DCF.

DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party connectors (for instance a manager).

Connectivity for this protocol is managed by the parent protocol Axon ACP.

Interfaces

Physical Interfaces

  • SDI Input: A single fixed interface of type input.
  • AES/EBU Input 1: A single fixed interface of type input.
  • AES/EBU Input 2: A single fixed interface of type input.
  • AES/EBU Input 3: A single fixed interface of type input.
  • AES/EBU Input 4: A single fixed interface of type input.
  • SDI Output 1: A single fixed interface of type output.
  • SDI Output 2: A single fixed interface of type output.
  • SDI Reclocked Output: A single fixed interface of type output.
  • SYNAPSE Bus Output 1: A single fixed interface of type output.
  • SYNAPSE Bus Output 2: A single fixed interface of type output.
  • SYNAPSE Bus Output 3: A single fixed interface of type output.
  • SYNAPSE Bus Output 4: A single fixed interface of type output.

Virtual Interfaces

  • Multiplexer 1: A single fixed interface of type inout.
  • Multiplexer 2: A single fixed interface of type inout.

Connections

Internal Connections

When a DVE child element is created, the following connections are established:

  • Between SDI Input and SDI Output 1.
  • Between SDI Input and SDI Output 2.
  • Between SDI Input and SDI Reclocked Output.
  • Between SDI Input and Multiplexer 1.
  • Between SDI Input and Multiplexer 2.
  • Between Multiplexer 1 and SDI Output 1.
  • Between Multiplexer 1 and SDI Output 2.
  • Between Multiplexer 1 and SDI Reclocked Output.
  • Between Multiplexer 1 and SYNAPSE Bus Output 1.
  • Between Multiplexer 1 and SYNAPSE Bus Output 2.
  • Between Multiplexer 1 and SYNAPSE Bus Output 3.
  • Between Multiplexer 1 and SYNAPSE Bus Output 4.
  • Between Multiplexer 2 and SDI Output 1.
  • Between Multiplexer 2 and SDI Output 2.
  • Between Multiplexer 2 and SDI Reclocked Output.
  • Between Multiplexer 2 and SYNAPSE Bus Output 1.
  • Between Multiplexer 2 and SYNAPSE Bus Output 2.
  • Between Multiplexer 2 and SYNAPSE Bus Output 3.
  • Between Multiplexer 2 and SYNAPSE Bus Output 4.

Depending on the state of Input A1, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 1 with Connection Name suffix "In-A1".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 1 with Connection Name suffix "In-A1".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 1 with Connection Name suffix "In-A1".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 1 with Connection Name suffix "In-A1".

Depending on the state of Input A2, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 1 with Connection Name suffix "In-A2.
  • AES-2: Between AES/EBU Input 2 and Multiplexer 1 with Connection Name suffix "In-A2".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 1 with Connection Name suffix "In-A2".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 1 with Connection Name suffix "In-A2".

Depending on the state of Input A3, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 1 with Connection Name suffix "In-A3".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 1 with Connection Name suffix "In-A3".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 1 with Connection Name suffix "In-A3".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 1 with Connection Name suffix "In-A3".

Depending on the state of Input A4, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 1 with Connection Name suffix "In-A4".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 1 with Connection Name suffix "In-A4".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 1 with Connection Name suffix "In-A4".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 1 with Connection Name suffix "In-A4".

Depending on the state of Input B1, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 2 with Connection Name suffix "In-B1".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 2 with Connection Name suffix "In-B1".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 2 with Connection Name suffix "In-B1".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 2 with Connection Name suffix "In-B1".

Depending on the state of Input B2, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 2 with Connection Name suffix "In-B2".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 2 with Connection Name suffix "In-B2".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 2 with Connection Name suffix "In-B2".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 2 with Connection Name suffix "In-B2".

Depending on the state of Input B3, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 2 with Connection Name suffix "In-B3".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 2 with Connection Name suffix "In-B3".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 2 with Connection Name suffix "In-B3".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 2 with Connection Name suffix "In-B3".

Depending on the state of Input B4, the following connections are established:

  • AES-1: Between AES/EBU Input 1 and Multiplexer 2 with Connection Name suffix "In-B4".
  • AES-2: Between AES/EBU Input 2 and Multiplexer 2 with Connection Name suffix "In-B4".
  • AES-3: Between AES/EBU Input 3 and Multiplexer 2 with Connection Name suffix "In-B4".
  • AES-4: Between AES/EBU Input 4 and Multiplexer 2 with Connection Name suffix "In-B4".
Improve this page