Axon ACP DBE08

The DBE08 is a Dolby-E encoder standalone or add-on card.

The Axon ACP DBE08 connector can be used to display and configure information related to this device.

About

There are different possibilities available for alarm monitoring and trending.

Version Info

Range	Key Features	Based on	System Impact
1.0.0.x [SLC Main]	Initial version	-	-

Product Info

Range	Supported Firmware
1.0.0.x	1417, 1418, 1518

System Info

Range	DCF Integration	Cassandra Compliant	Linked Components	Exported Components
1.0.0.x	Yes	Yes	-	-

Installation and configuration

Creation

The element using this connector can be automatically created by the parent element using the Axon ACP Frame Manager connector, but it can also be a standalone element.

Connections

Serial Main Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

• Interface connection:

  • IP address/host: The polling IP or URL of the destination.
  • Bus address: The bus address of the device, being the slot number of the card.

Serial Broadcast Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

• Interface connection:

  • IP address/host: The polling IP or URL of the destination.
  • Bus address: The bus address of the device.

How to use

This element has the following data pages:

• General: This page displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
• Status
• AES
• Dolby-E
• Settings
• Meta Data
• Alarm Priority: This page displays the event messages of the card, i.e., special messages generated asynchronously on the card.

DataMiner Connectivity Framework

The Axon ACP connector supports the usage of DCF.

DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party connectors (for instance a manager).

Interfaces

Physical Interfaces

• AES 1/2: A single fixed interface of type input.
• AES 3/4: A single fixed interface of type input.
• AES 5/6: A single fixed interface of type input.
• AES 7/8: A single fixed interface of type input.
• REF Input 1: A single fixed interface of type input.
• REF Input 2: A single fixed interface of type input.
• SYNAPSE Bus Input 1: A single fixed interface of type input.
• SYNAPSE Bus Input 2: A single fixed interface of type input.
• SYNAPSE Bus Input 3: A single fixed interface of type input.
• Dolby-E Output: A single fixed interface of type output.
• AUX Output: A single fixed interface of type output.
• SYNAPSE Bus Output 1: A single fixed interface of type output.
• SYNAPSE Bus Output 2: A single fixed interface of type output.
• SYNAPSE Bus Output 3: A single fixed interface of type output.
• SYNAPSE Bus Output 4: A single fixed interface of type output.

Connections

Internal Connections

When a element is created, the following connections are established:

• Between AES 1/2 and Dolby-E Output.
• Between AES 1/2 and AUX Output.
• Between AES 1/2 and SYNAPSE Bus Output 1
• Between AES 3/4 and Dolby-E Output.
• Between AES 3/4 and AUX Output.
• Between AES 3/4 and SYNAPSE Bus Output 1.
• Between AES 5/6 and Dolby-E Output.
• Between AES 5/6 and AUX Output.
• Between AES 5/6 and SYNAPSE Bus Output 1.
• Between AES 7/8 and Dolby-E Output.
• Between AES 7/8 and AUX Output.
• Between AES 7/8 and SYNAPSE Bus Output 1.
• Between SYNAPSE Bus Input 1 and SYNAPSE Bus Output 2.
• Between SYNAPSE Bus Input 2 and SYNAPSE Bus Output 3.
• Between SYNAPSE Bus Input 3 and SYNAPSE Bus Output 4.

Depending on the state of the Reference Input, the following connections are established:

• REF 1:

• Between REF Input 1 and Dolby-E Output.

  • Between REF Input 1 and AUX Output.

• REF 2:

• Between REF Input 1 and Dolby-E Output.

  • Between REF Input 1 and AUX Output.

Notes

It is recommended to use this connector in combination with the Axon ACP Frame Manager connector for optimal coverage of information.