Axon ACP DEE28
The DEE28 is a next-generation Dolby multi-format decoder and Dolby E encoder with quad-speed ADD-ON audio bus.
The Axon ACP DEE28 connector is a serial connector used to control the Axon DEE28 card.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 0807 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP.
- Bus address: The bus address or slot number/position of the card in the frame.
Serial Broadcast Connection
This connector uses a smart-serial connection and requires the following input during element creation:
SMART-SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP.
- IP port: The IP port of the destination. Specify "any".
- Bus address: The bus address or slot number/position of the card in the frame.
How to use
The element has the following data pages:
- General: Displays information about the identity of the card, as well as other general information: Card Name, Card Description, SW Revision, HW Revision, etc.
- System Settings: Contains sample rate converters and other system control parameters.
- Decoder Options: Contains decoder control parameters such as inputs.
- Decoder Metadata: Contains parameters that indicate the value of the metadata parameters. This page also contains the Program Scale Factor page button.
- E-encoder Inputs Ch1-4/5-8/9-12/13-16: These pages contain information about the sources, gain, phase, delay and audio system of the output channels.
- VO Control: Contains the VO control parameters. The DBD handles voice-over channels. With the settings on this page, you can configure how the involved program out channels should react to a voice-over signal and how everything is triggered.
- Encoder Options: Contains encoder control parameters such as metadata, downmix, preprocessing, etc.
- Add_On Bus: Contains the ADD-ON bus parameters such as the meta bus control, the quad speed audio bus outputs (Slot 1/2 ~ Slot 31/32) and parameters used to pass processed audio from one quad-speed add-on card to another (override parameters).
- Local Outputs: Contains parameters used to route the default channels to the output muxes or to route the encoded Dolby E signal to a specific output.
- Loudness: Contains loudness control and monitoring parameters.
- Monitoring: Contains the current status information of the AES inputs and channels.
- Alarm Priority: This page displays the event messages of the card, i.e., special messages generated asynchronously on the card.