Table of Contents

Axon ACP DLA41

The DLA41 is based on third-generation audio and loudness management technology by Linear Acoustic. It protects viewers from loudness shifts and loss of surround sound in a simple, cost-effective, modular and hot-swappable manner next to over 150 other Synapse modules.

About

This connector can be automatically generated by the connector Axon ACP Manager.

There are different possibilities available for alarm monitoring and trending.

Version Info

Range Key Features Based on System Impact
1.0.0.x Initial version [SLC Main] - -

Product Info

Range Supported Firmware
1.0.0.x 2213

System Info

Range DCF Integration Cassandra Compliant Linked Components Exported Components
1.0.0.x No Yes - -

Configuration

Connections

IP Connection - Unicast

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP of the device.
    • IP port: The IP port of the device.
    • Bus address: The bus address of the device.

IP Connection - Broadcast

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP of the device.
    • IP port: The IP port of the destination.
    • Bus address: Use the value "any" inside of it.

How to use

This element has the following data pages:

  • General: Displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
  • Status: Displays the status of the inputs and channel gains.
  • I/O: Allows you to configure the inputs and outputs of the card, as well as the GPI Control.
  • Audio 1/4: Allows you to configure gain, phase and delay for channels 1-4.
  • Audio 5/8: Allows you to configure gain, phase and delay for channels 5-8.
  • Add-On: The drop-down boxes on this page allow you to fill the Quad speed audio bus with the appropriate outputs for slots 1-32.
  • Preset
  • Mixer
  • Metadata: Displays the status of the metadata parameters.
  • Alarm Priority: Displays the event messages of the card, i.e., special messages generated asynchronously on the card.

Notes

This connector is best combined with the Axon ACP Frame Manager connector, but can be used as a standalone connector as well

Improve this page