Axon ACP ERS10 - ASI10

The ASI10 is a dual-channel ASI/DVB integrity checker with a 2x2 output switch. Each output has a dual fan-out for distribution of the signal.

The Axon ACP ERS10 - ASI10 connector can be used to display and configure information of the related device.

About

A serial connection is used in order to successfully retrieve and configure the device's information. There are also different possibilities available for alarm monitoring and trending.

This connector is automatically generated by the connector Axon ACP ERS10.

Product Info

The table below indicates which device revision is available since a specific connector version. Every connector version, within the same range, also supports the previously implemented revisions.

Connector Version	Device Revision
1.0.0.1	Rev. 11
1.0.1.1	Rev. 11
1.2.0.1	Rev. 11
2.1.0.1	Rev. 11
2.2.0.1	Rev. 11

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required.

Usage

General

This page contains generic information: Card Name, Slot Number, Card ID, Software Revision, Hardware Revision, etc.

Status

This page indicates the current status of some specific parameters for both channels: Active A/B, Link A/B, Data Rate High A/B, etc.

Settings

This page displays the current status of some ASI10 settings (e.g., Output Configuration, Input Selection, Rate Status, etc.) and allows you to change or adjust them.

Channel A/B

For both channels, a page is available with the channel-related settings: Max Data Rate A/B, Min Data Rate A/B, PAT Upper Dist A/B, etc.

Alarm Priority

This page contains the individual priority settings for the supported events.