Axon ACP ERS10 - DIO48

The DIO48 is a multi-functional product. Its basic function is the conversion of asynchronous AES/EBU digital audio into synchronous AES/EBU, utilizing the on-board sample rate converter. The card has a tracking audio delay, with a delay offset possibility up to 1300 ms, and it can perform the Synapse ADD-ON input and output function. Also provided in this module is shuffling and mixing of the AES channels. This board can be used as an input or output ADD-ON board.

The Axon ACP ERS10 - DIO48 connector can be used to display and configure information of the related device.

About

A serial connection is used in order to successfully retrieve and configure the device's information. There are also different possibilities available for alarm monitoring and trending.

This connector is automatically generated by the connector Axon ACP ERS10.

Product Info

The table below indicates which device revision is available since a specific connector version. Every connector version, within the same range, also supports the previously implemented revisions.

Connector Version	Device Revision
1.0.0.1	Rev. 06
1.0.1.1	Rev. 06
1.2.0.1	Rev. 06
2.1.0.1	Rev. 06
2.2.0.1	Rev. 06

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required.

Usage

General

This page contains generic information: Card Name, Slot Number, Card ID, Software Revision, Hardware Revision, etc.

Status

This page contains the card's generic status information: Tracking Input, AES Input, etc.

Settings

This page contains the card's generic configuration settings: Reference Input, Tracking, Channel Mode, etc.

Channels

For both channels, a page is available with the channel-related configuration settings: Source A/B 1, Phase A/B 1, Gain A/B 1, Silence Detection A/B 1, etc.

Alarm Priority

This page contains the individual priority settings for the supported events.