Axon ACP ERS11 - ERS11

The ERS11 is the central controller of the Synapse system that includes an SNMP agent. It is used to configure, control and monitor Synapse systems and to provide network connectivity. It also provides an input for 2 independent references with loop-through.

The Axon ACP ERS11 - ERS11 connector can be used to display and configure information of the related device.

About

A serial connection is used in order to successfully retrieve and configure the device's information. There are also different possibilities available for alarm monitoring and trending.

This connector is automatically generated by the connector Axon ACP ERS11.

Product Info

The table below indicates which device revision is available since a specific connector version. Every connector version, within the same range, also supports the previously implemented revisions.

Connector Version	Device Revision
1.0.0.1	Rev. 98

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required.

Usage

General

This page contains generic information: Card Name, Slot Number, Card ID, Software Revision, Hardware Revision, etc.

Status

This page contains the card's generic status information: Feature, SNMP, PSU, Temperature, etc.

MIB

This page provides an overview of which card type is inserted in which slot of the chassis, along with its firmware.

Network

This page contains the card's network-related configuration settings: IP Configuration, IP Address, Subnet Mask, etc.

Alarm Priority

This page contains the individual priority settings for the supported events.