Axon ACP ERS11 - HEB05

The HEB05 is an HD SDI and SD SDI digital audio embedder. It is capable of inserting or appending 4 free-running AES/EBU digital audio channels (8 channels). The core of the HEB05 consists of 4 embedder blocks (A -> D). Each block is capable of embedding 4 audio channels into one group, for a total of 16 audio channels in 4 groups. In addition, 4 ADD-ON cards can be connected to create a routing matrix. One ADD-ON card is needed to get 16 embedded channels (DIO48).

The Axon ACP ERS11 - HEB05 connector can be used to display and configure information of the related device.

About

A serial connection is used in order to successfully retrieve and configure the device's information. There are also different possibilities available for alarm monitoring and trending.

This connector is automatically generated by the connector Axon ACP ERS11.

Product Info

The table below indicates which device revision is available since a specific connector version. Every connector version, within the same range, also supports the previously implemented revisions.

Connector Version	Device Revision
1.0.0.1	Rev. 07

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required.

Usage

General

This page contains generic information: Card Name, Slot Number, Card ID, Software Revision, Hardware Revision, etc.

Status

Add On

This page contains the Add On configuration settings.

Settings

This page contains the card's generic settings: Preset, SDI Format, Field Frequency, Emb Mode, etc.

AES

This page contains the AES-related configuration settings: Delay, Gain and Phase.

Embedder

This page contains the configuration settings for each of the embedders: Selection, 1/2 and 3/4.

Alarm Priority

This page contains the individual priority settings for the supported events.