Axon ACP SDR108
The SDR108 is a single-channel SD-SDI distribution amplifier. This card can be used as a reclocking or non-reclocking amplifier. It is ASI/DVB compatible.
The Axon ACP SDR108 connector can be used to display and configure information related to this device. This connector is linked with Axon ACP Frame Manager and will appear in the overview table in the corresponding frame slot.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 0900 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP or URL of the destination.
- Bus address: The slot number/position of the card in the frame.
Serial IP Connection - Broadcast Connection
This connector uses a serial connection and requires the following input during element creation:
SMART-SERIAL CONNECTION:
Interface connection:
- IP address/host: any
- Bus address: The slot number/position of the card in the frame.
How to use
The element has the following data pages:
- General: Displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
- Status: Displays status parameters related to the card itself, such as SDI Input, PLL Rate, SFP Status, SFP Temperature Status, SFP Voltage Status, Ports 1 and 2 Power, Bias and Wavelength, etc.
- Settings: Allows you to configure card settings such as PLL Set, Reclock, Mute, HDMI, HMDI Format, HDMI DVI Mode, HDMI Mute All, CBVS and CBVS Format.
- Events: Displays information related to events.