Table of Contents

Axon ACP U4T100

The U4T100 is a 4K UHD 4-wire toolbox with optional Dolby-E processing.

The Axon ACP U4T100 connector can be used to display and configure information related to this device.

About

This connector can be automatically generated by the connector Axon ACP.

There are different possibilities available for alarm monitoring and trending.

Version Info

Range Key Features Based on System Impact
1.0.0.x Initial version [SLC Main] - -

Product Info

Range Supported Firmware
1.0.0.x 0406, 0914, 1017, 1320, 1321, 2028, 2230, 2435, 2436, 2536, 2738

System Info

Range DCF Integration Cassandra Compliant Linked Components Exported Components
1.0.0.x No Yes - -

Configuration

Creation

The element using this connector can be automatically created by the parent element using the Axon ACP connector, but it can also be a standalone element.

Connections

Serial Main Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP or URL of the destination.
    • Bus address: The bus address of the device, being the slot number of the card.

Serial Broadcast Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP or URL of the destination.
    • Bus address: The bus address of the device.

Usage

The element has the following data pages:

  • General: This page displays general information about the card: Card Name, Card Description, SW Revision, HW Revision, etc.
  • SFP
  • Add-On
  • Status
  • I/O Status
  • LUT
  • I/O
  • GPI/O
  • Video
  • Audio
  • Settings
  • Embedder
  • Embedder 01/04
  • Embedder 05/08
  • Embedder 09/12
  • Embedder 13/16
  • Network
  • Alarm Priority: This page displays the event messages of the card, i.e. special messages generated asynchronously on the card.

DataMiner Connectivity Framework

The Axon ACP connector supports the usage of DCF.

DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party protocols (for instance a manager).

Interfaces

Physical Interfaces

  • SDI Input 1: A single fixed interface of type input.
  • SDI Input 2: A single fixed interface of type input.
  • SDI Input 3: A single fixed interface of type input.
  • SDI Input 4: A single fixed interface of type input.
  • SDI Output 1: A single fixed interface of type output.
  • SDI Output 2: A single fixed interface of type output.
  • SDI Output 3: A single fixed interface of type output.
  • SDI Output 4: A single fixed interface of type output.

Connections

Internal Connections

Depending on the state of the Input Selection A, the following connections are established:

  • SDI-1: Between SDI Input 1 and SDI Output 1.
  • SDI-2: Between SDI Input 2 and SDI Output 1.
  • SDI-3: Between SDI Input 3 and SDI Output 1.
  • SDI-4: Between SDI Input 4 and SDI Output 1.

Depending on the state of the Input Selection B, the following connections are established:

  • SDI-1: Between SDI Input 1 and SDI Output 2.
  • SDI-2: Between SDI Input 2 and SDI Output 2.
  • SDI-3: Between SDI Input 3 and SDI Output 2.
  • SDI-4: Between SDI Input 4 and SDI Output 2.

Depending on the state of the Input Selection C, the following connections are established:

  • SDI-1: Between SDI Input 1 and SDI Output 3.
  • SDI-2: Between SDI Input 2 and SDI Output 3.
  • SDI-3: Between SDI Input 3 and SDI Output 3.
  • SDI-4: Between SDI Input 4 and SDI Output 3.

Depending on the state of the Input Selection D, the following connections are established:

  • SDI-1: Between SDI Input 1 and SDI Output 4.
  • SDI-2: Between SDI Input 2 and SDI Output 4.
  • SDI-3: Between SDI Input 3 and SDI Output 4.
  • SDI-4: Between SDI Input 4 and SDI Output 4.
Improve this page