Table of Contents

Axon ACP UXU410

The UXU410 is a high-end up-/down-/cross-converter. The card allows you to simulcast any output standard in any format from any source standard. The embedded audio is carried over to the SD, HD or 3 Gb/s domain.

The Axon ACP UXU410 connector is used to manage UXU410 Axon cards.

About

Version Info

Range Key Features Based on System Impact
1.0.0.x [SLC Main] Initial version - -

Product Info

Range Supported Firmware
1.0.0.x 1720 1925

System Info

Range DCF Integration Cassandra Compliant Linked Components Exported Components
1.0.0.x Yes Yes - -

Configuration

Connections

Serial Main Connection

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP or URL of the destination.
    • IP port: The IP port of the destination (fixed value: 2071).
    • Bus address: The bus address or slot number/position of the card in the frame.

Serial IP Connection - Events Connection

This connector uses a smart-serial connection and requires the following input during element creation:

SMART-SERIAL CONNECTION:

  • Interface connection:

    • IP address/host: The polling IP or URL of the destination.
    • IP port: The IP port of the destination (fixed value: 2071).
    • Bus address: The bus address or slot number/position of the card in the frame.

How to use

The setting of some parameters depends on other parameters' current value. For example, on the Network page, in order to set the Preferred IP Address, you need to make sure the IP Configuration is set to Manual mode. When such a parameter is not set to the correct value, a message box will be displayed. Follow the instructions in the message box and set the required parameter to the appropriate value before setting the other parameter.

DataMiner Connectivity Framework

The 1.0.0.x connector range of the Axon ACP UXU410 connector supports the usage of DCF.

DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party connectors (for instance a manager).

Interfaces

Fixed interfaces

Physical fixed interfaces:

  • SDI Input 1: A single fixed interface of type in.
  • SDI Input 2: A single fixed interface of type in.
  • SDI Input 3: A single fixed interface of type in.
  • SDI Input 4: A single fixed interface of type in.
  • SDI Output 1: A single fixed interface of type out.
  • SDI Output 2: A single fixed interface of type out.
  • SDI Output 3: A single fixed interface of type out.
  • SDI Output 4: A single fixed interface of type out.

Connections

Internal Connections

  • SDI Input 1 -> SDI Output 1.
  • SDI Input 1 -> SDI Output 2.
  • SDI Input 1 -> SDI Output 3.
  • SDI Input 1 -> SDI Output 4.
  • SDI Input 2 -> SDI Output 1.
  • SDI Input 2 -> SDI Output 2.
  • SDI Input 2 -> SDI Output 3.
  • SDI Input 2 -> SDI Output 4.
  • SDI Input 3 -> SDI Output 1.
  • SDI Input 3 -> SDI Output 2.
  • SDI Input 3 -> SDI Output 3.
  • SDI Input 3 -> SDI Output 4.
  • SDI Input 4 -> SDI Output 1.
  • SDI Input 4 -> SDI Output 2.
  • SDI Input 4 -> SDI Output 3.
  • SDI Input 4 -> SDI Output 4.

Notes

This connector is best combined with the Axon ACP Frame Manager connector, but it can be used as a standalone connector as well.

Improve this page