Table of Contents

Axon HXH10

This is an SNMP-based connector used to display and configure information of the Axon HXH10 card.

About

The Axon HXH10 is an HD-SDI or SD-SDI to two SDI output cross-converter. The connector displays information and allows the user to change settings regarding the converter.

Installation and configuration

Creation

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.
  • Device address: Required range: 0 - 18.

SNMP Settings:

  • Port number: The port of the connected device, by default 161.
  • Get community string: The community string in order to read from the device. The default value is public.
  • Set community string: The community string in order to set to the device. The default value is private.

Usage

This connector has 2 pages: General and Settings.

General

This page displays information regarding the device itself, such as the Card ID and Name, User Label, Software and Hardware Revisions, Product Code, Serial Number, SDI Input, Output Format and Color Converter.

Settings

On this page, you can view and configure settings concerning the Output Format, Color Converter, Gains, Blacks, Embedded Inputs and Audio Delay.

With the Alarm Priority page button, you can access the following settings: Announcement Priority, Input Priority and CRC Status.

Notes

DCF implementation on version: 1.0.1.1

Improve this page