Axon Tracs2 Compliance Recorder
This connector is used for the basic monitoring of the Axon Tracs2 Compliance Recorder.
About
With this connector, it is possible to monitor the hard disks, channel information and connectivity status of the Axon Tracs2 Compliance Recorder. This information is polled via SNMP.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 2.9.2.r1.588 |
Installation and configuration
Creation
SNMP Main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General Page
This page displays the ID of the recorder and status information, including the following statuses:
- LTC status
- NTP status
- Network status
- Raid status
Hard Disk Slots Page
This page contains the Hard Disk Table, which lists all the drives connected to the device, displaying any problems as well as the S.M.A.R.T. health status of the drives.
Channels Page
This page contains the Channel Table. This table displays all the media channels that are configured in the device.
Notes
Only basic monitoring can be done with this connector. Advanced features of the device are currently only available via the Axon Tracs2 Compliance Recorder client software.