CE+T TSI via T2S ETH
The TSI via T2S ETH connector allows you to monitor a TSI inverter with up to 32 inverters through SNMPv1 communication.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial development | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 7.5.0 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element has the following data pages:
- General: Displays general information related to the device.
- UPS: Displays the DC voltage and current of the battery.
- Phases: Displays voltage, current and power for each available phase.
- AC-in and DC: Displays the power, current and voltage for each DC and AC group.
- Modules: Contains general information for each active module (e.g., state, address, phase number, etc.).
- AC Input/DC/AC Output: The pages display AC or DC voltage, current and power information for each active module.
- Temperature: Displays the temperature for each active module.
- Alarms: Contains a list of alarms.
- Configuration: Contains a list of configuration values.