CEFD CDD-880 SNMP
The CDM-880 Multi Receiver Router serves as the hub expansion utility component of Comtech EF Data's Advanced VSAT Series group of products. It can receive transmissions from up to 12 CDM-840 Remote Routers.
About
This connector is intended to get/set information from/to the device via an Element in a DataMiner System, using SNMP commands. To get more detailed information consult the website http://www.comtechefdata.com/support/docs/advancedvsatdocs.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x [SLC Main] | Multiple tables now uses naming instead of displayColumn to make the database for these tables Cassandra-compliant. | 1.0.0.22 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
| 1.0.1.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | No | - | - |
| 1.0.1.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
Port number: The port of the connected device, default 161.
Get community string: The community string in order to read from the device. The default value is public.
Set community string: The community string in order to set to the device. The default value is private.
Usage
General
This page contains information about the System Information, Service Contact and Device Overall Status.
Admin
In this page is given information about the FAST Configuration and is also possible to set the SNMP Configuration, Auto Logout Configuration, Firmware Configuration and Vipersat Management System Configuration.
Configuration - Interface
Use this page to assign the device's IPs using the Interface Table and also to set the Port Diversity function.
Configuration - WAN - Demod
All related demodulator configurations are done in this page. Set individual configurations using the Individual Demodulator Settings Table and set global configurations in the Global Demodulator Settings menu.
Configuration - WAN - ACM
In this page is available the Rx ACM Log and also the Link Adaptation Config Table.
Configuration - WAN - LNB
Use this page to set the LNB's Control configurations and also to check its meausurements under the LNB Status label.
Configuration - Network
On this page, several configurations can be done:
- ARP Table to set ARP configurations;
- Working Mode to set the Working Mode to Router or BPM.
- PTP Configuration and Status.
- Encryption ... - To set the 8 Encryption Keys.
Configuration - Network - Routing
Still related to the Network configuration, the Route Table can be found here as well as the Mesh Location setting.
Configuration - ECM
To set ECM Remote Configuration and to consult the ECM Remote Status.
Status - Stats - Interface
In this page is possible to check the interfaces rates in the Interfaces Information table.
Status - Stats - Traffic
In this page is available the Ethernet Stats Table, the Demod Stats Table and also Rx Satellite measurements.
Status - Stats - Demod
Several status tables related to the demodulator are available in this page:
- Demod Status Table
- Link Adaptation Status Table
- VS Status Table
Status - Stats - Router
In this page are available the Interface, Routers and Management Counters. The Clear Statistics button clears them all.
Status - Stats - PTP
This page provides information about PTP LAN and WAN Statistics.
Status - Stats - Managed Switch
In this page are available the Managed Switch and the Managed Switch LAN Statistics.
Status - Monitor - Alarms
Various information about alarms can be found here:
- Alarms - Unit, LNB, Traffic Ethernet and PTP general Alarms.
- Rx Alarms - Related to the Demodulators.
- Demodulator Alarms - In depth information about Demod Alarm State/Mask.
- Unit Alarms - In depth information about Unit Alarm States/Masks.
Status - Monitor - Events
If there is an event on the device it will be shown in the Event Table. Use the Clear button to clean the buffer.
Utility
This page contains some utility functions:
- Modem - Some modem settings and general information.
- Save/Load Configuration - To save current settings in the device's memory or by the other hand, to load settings from one of the 10 available memory's indexes.
- Memory Usage (Diagnostic) - Information about memory usage.
Utility - BERT / Redundancy
Settings related to BERT and Redundancy are present under this page.
Traps
Traps sent from the device are stored in the Traps table.
FTP
Settings related to download/upload firmware to/from device can be found here.
Web Interface
Use this page to have access to the Web Interface provided by the device's web server (Only accessible in LAN environment).