Table of Contents

CEFD CDM-625A Serial (FSK)

The CEFD CDM-625A Serial (FSK) connector is used by DVEs created by the CEFD CDM-625A Serial protocol. The exported connector is specifically used to monitor the FSK functionality of the CEFD CDM-625A Serial connector.

About

This connector is exported by the CEFD CDM-625A Serial protocol, and mainly allows the user to control and monitor BUC/LNB components.

Product Info

Range Supported Firmware Version
1.0.0.x 1.4.1

Installation and configuration

Creation

This connector is automatically generated by the connector CEFD CDM-625A Serial, range 1.0.0.x, if the FSK Enabled option on the FSK page is enabled.

Usage

BUC

This page allows you to monitor and control BUC features, such as:

  • BUC Alarm: BUC status/faults.
  • BUC Power: BUC power control.
  • BUC 10Mhz Reference: Allows you to enable or disable the reference.
  • BUC Output: Allows you to enable or disable the output power.
  • BUC Low Current Limit
  • BUC High Current Limit
  • Tx LO Frequency: The transmit LO frequency.
  • Tx Mix: The transmit mix.
  • BUC Tx Satellite Frequency: The transmit satellite frequency.
  • BUC Terminal Tx Frequency: The terminal transmit frequency.
  • BUC Power Level 2: The output power level in 0.1 dBm steps.
  • BUC Address
  • BUC Current
  • BUC Voltage
  • BUC Power Level
  • Temperature Level
  • BUC Phase Locked Loop: Only valid when FSK/BUC are turned on.
  • BUC Carrier Output Delay

LNB

On this page you can view and monitor the following information:

  • LNB Alarm: LNB status/faults
  • LNB Power: LNB power control.
  • LNB Frequency Reference
  • LNB Output: Allows you to enable or disable the output power.
  • LNB Low Current Limit
  • LNB High Current Limit
  • Rx LO Frequency: The receive LO frequency.
  • Rx Mix: The receive mix.
  • LNB Terminal Rx Frequency: The terminal receive frequency.
  • LNB Current
  • LNB Voltage
Improve this page