Cisco RTT Mon
The Cisco RTT Mon is used for measuring delay, jitter, and packet loss on the data network.
This connector uses SNMP polling to communicate with the device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | No | - | - |
Configuration
Connections
SNMP Connection- Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device. By default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Usage
General
This page displays a table of IP SLA Entries and a table with the Latest RTT Operations. This information is read-only.
Jitter Statistics
This page presents a table with Jitter Statistics.
ICMP Jitter Statistics
This page presents a table with ICMP Jitter Statistics.