CPI Codan 7000 Series RBUC
CPI Codan 700 Series RBUC is block upconverter that is typically used for rapid deployments or offshore applications. This connector is built based on the native web UI.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 3.22 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
On the General page of the connector, you can find device data such as the Model Number, Serial Number, and Firmware Version. This page also contains status data.
The Main Settings page contains configuration parameters.
The Auxiliary Settings page contains network interface data.
On the Faults page, you can see the status of (current and latched) faults.