CPI SSPA SNMP
This connector can be used to monitor a CPI SSPA SNMP device. The CPI SSPA SNMP is an RF power amplifier.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.3.15 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default: public.
- Set community string: The community string used when setting values on the device, by default: private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The most important parameters of this connector are displayed on the Status page: Attenuation, Output Power, Temperature, etc.