CPI VZC-6967V7

The CPI VZC-6967V7 connector is a serial connector used to monitor and configure the CPI VZC-6967V7 device.

About

The CPI VZC-6967V7 is an amplifier. The connector uses serial communication to monitor and configure the device. This means that it sends commands to the device and receives a response for every command.

Installation and configuration

Creation

This connector uses a serial connection and requires the following input during element creation:

SERIAL CONNECTION:

• IP address/host: The polling IP of the device, e.g., 10.11.12.13.
• IP port: The port of the connected device.
• Bus address: The bus address of the connected device. (Between 48 and 111.)

Usage

Main View Page

This page displays the general information about the device, e.g., the Helix Voltage, Helix Current, RF Output Power...

General Control Page

This page displays information about the alarm thresholds. The thresholds are configurable.

Control RF Output Page

This page displays information about the RF Output.

Meter Query Page

This page displays information about the Meter Query.

Linearizer Query Page

This page displays information about Gain, Phase and Magnitude Offsets.

Configuration Page

This page displays information about the device configuration.

Status Info Page

This page displays Fault States.

Log Page

This page displays Log Information.

Web interface

This page displays the web interface of the amplifier.