CPI VZU-6995VX
The CPI VZU-6995VX is a 500 W TWT medium-power amplifier. This connector uses serial communication to communicate with this device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device.
Initialization
No further configuration is required. If the connection has been correctly configured, the connector will start polling the device as soon as the element is created.
How to Use
On the General Control page of this connector, you can change the date/time configuration and configure everything related to switches, such as W/G Switch Controller mode, Preset and the Switch 1 to 4 positions.