Cisco ASA 5540
This connector can be used to monitor Cisco ASA 5540 firewall devices via SNMP. The bitrate parameters are calculated from the octet counters. All other data is polled using SNMP.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | No | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page displays general information such as the device name, location, uptime, etc. Via page buttons, you can access entity, interfaces, SNMP and Ethernet information.
The Firewall page displays statistics related to the firewall functionality of the device, while the Remote Access page displays remote access information.
The Crypto Accelerators page displays information about the cryptographic accelerator modules and the IPsec page displays information about IPsec phase 1 and 2.
The Memory Pool and CPU pages display a table showing the memory usage and a table showing the usage of all CPU cores, respectively.
On the Physical Sensors page, you can find the Physical Sensor Table and the Sensor Ext Threshold Table.