Cisco GS7000 Hub
The Cisco GS7000 Hub provides multiple options for optical amplification, filtering, splitting, and combining, in a field-proven model GS7000 station. This connector can be used to monitor this device.
About
The connector uses an SNMP connection to monitor a Cisco GS7000 Hub device. It allows you to view information about the cable modem, DC power, switch, amplifier, etc.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
- Device address: The device address.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page contains general information, such as the Model number, Serial Number, Vendor Information, etc.
Network
This page contains the tables IP Address and Interface. It also contains seven page buttons:
- Interface Extended
- IP
- ICMP
- IGMP
- UDP
- Dot1
- Dot3
Transponder
This page contains seven tables with information about the cable modem:
- CM MAC
- Bpi2 CM Base
- CM Status
- Bpi2 CM TEK
- CM Service
- Bpi2 CM Device Certificate
- Bpi2 CM Cryptographic Suit
This page also contains two page buttons: Cable Modem Information and Cable Modem.
QOS
This page contains four tables:
- QOS Parameter Set
- QOS Service Flow
- QOS Service Flow Statistics
- QOS Dynamic Service Statistics
Device
This page contains general information about the software and server. It also contains four page buttons:
- Identity
- Event
- Access
- Physical
Alarm Log
This page contains the Alarm Log table and a series of related parameters.
DC Power
This page contains the DC Power table and a series of related parameters.
Switch
This page contains the Optical Switch and Switch Input tables.
Amplifier
This page contains the Amplifier Input Laser, Amplifier Input Data and Amplifier Input tables.
Vo IP
This page contains the Vo IP Test Control and VO IP Test Result tables.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.
Notes
- For each of the tables in the connector, a Polling parameter allows you to enable or disable the polling of the table.
- In all tables, there is a Description column, where you can specify a description, and a Custom Description column, which concatenates the Index of the table and the Description column.