D-Link DGS-3630 Series

The DGS-3630 Series is a range of Layer-3 Stackable Managed Switches. This connector can be used to monitor and configure such devices.

The connector uses an SNMP connection.

About

Version Info

Range	Key Features	Based on	System Impact
1.0.0.x [SLC Main]	Initial version	-	-

Product Info

Range	Supported Firmware
1.0.0.x	2.25.B025

System Info

Range	DCF Integration	Cassandra Compliant	Linked Components	Exported Components
1.0.0.x	No	Yes	-	-

Configuration

Connections

SNMP Main Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

• IP address/host: The polling IP of the device.

SNMPv2 settings:

• Port number: The port of the connected device, e.g., 161.
• Get community string: The community string used when reading values from the device, e.g., public.
• Set community string: The community string used when setting values on the device, e.g., private.

Usage

General

This page displays general information about the device, such as the Name, Location, and Description.

It also contains the following buttons:

• ICMP: Displays ICMP and message statistics.
• System Services: Displays a page listing the state of the services of each OSI layer.
• TCP/UDP: Displays a page with all TCP and UDP status parameters.
• TCP Connection: Displays a page with a list of TCP connections and TCP listeners.
• UDP Endpoint: Displays a page with a list of UDP endpoints.
• Security: Displays a page with the security parameters, including the Port security tables.
• Drive Info: Displays a table with the drive's information.

SSH

This page contains the SSH configuration parameters, which include SSH Version, Timeout, and Authentication Retries.

This page also includes the SSH User table, which displays a list of the SSH user information.

Power

This page contains parameters for configuring system power settings, including Mini USB and the LED and Power table.

The page also contains a page button to the LLDP EEE subpage, which displays tables for configuring LLDP Remote EEE and LLDP Local EEE.

Safeguard Engine

This page contains safeguard engine parameters including the Safeguard Engine configuration, and the Fan and Air Flow tables.

This page has the following subpages:

• CPU: Displays overall CPU statistics.
• CPU Protect: Displays the CPU protect rare limit configuration.
• Memory: Displays information regarding RAM.
• Temperature: Displays switch temperature information.

PTP

This page displays information regarding the Precision Time Protocol (PTP) functionality.

This page has the following subpages:

• PTP Clock: Displays parameters regarding the clock.
• PTP Foreign Master: Displays a table regarding the foreign master.
• PTP Port: Displays a table with PTP port status information.

Unit

This page contains tables that display unit information for the switch, including the unit status and runtime.

Alarm

This page contains a table that displays the alarms in the switch.

File Configuration

This page contains a table that displays file copy information, as well as a table that contains information for replacing the current running configuration file.

Boot Image

On this page, you can configure the boot image properties. The page also displays tables that show the current boot image URL and status.

Time Clock

On this page, you can view and configure parameters related to the switch clock.

Source Interface IP

On this page, you can view and configure parameters related to the different source interface IP addresses, including TFTP, FTP, and RCP. and SSH.

Interface Detailed

This page contains the Detailed Interface table. This table provides general information about each interface.

Interface Rx

This page contains the Interface Rx table. This contains the input statistics of each interface.

Interface Tx

This page contains the Interface Tx table. This contains the output statistics of each interface.

L2 Features

This page contains the L2 Features parameters, which are used to configure the L2 interface settings. This includes the MAC change and load balance.

This page has the following subpages:

• L2 Interface Control: Displays L2 FDB interface status and control parameters
• L2 Channel Control: Displays channel group properties
• L2 Protocol: Displays parameters and tables that control the L2 protocol interface.
• L2 Global Control: Displays parameters for the L2 interface global control.
• L2 MAC: Displays the L2 Tunneling MAC control.

L3 Features

This page displays the MPLS L3 VRF and configuration settings.

This page contains the following subpages:

• L3 VRF: Displays a table with the L3 VPN VRF information and configuration parameters.
• L3 VRF Route Targe: Displays a table that specifies the pre-VRF route target association.
• L3 VRF Config: Displays a table with the L3 VPN interface configuration.

ACL

This page displays the Re-Sequencing table. This table contains information about how to re-sequence the rules in the access lists.

This page has the following subpages:

• ACL IP: Displays tables for configuring the IP access rule.
• ACL IPv6: Displays tables for configuring IPv6 access rule.
• ACL MAC: Displays tables for configuring the MAC access rule.

Ethernet

This page contains the Ethernet Stats table, which displays information about Ethernet stats for each Ethernet interface.

Storm Control

This page contains the general configuration regarding storm control.

The page also has the following subpages:

• Storm Control Interface: Displays a table listing all storm control interfaces and their action type.
• Storm Control Thresholds: Displays a table with the thresholds control for each of the storm control interfaces.
• Storm Control Traffic Info: Displays a table containing traffic info for each of the storm control interfaces.

IP

This page displays general IP statistics and settings such as Spin Lock, IP Forwarding, and IP Address Table.

The page also has the following subpages:

• IPv4: Displays a page containing the IPv4 Interface table.
• IPv6: Displays a page with the IPv6 Interface table and IPv6 Scope Zone Index Table.
• IP Route: Displays a page containing the IP route settings, including IP Default Route Table, Ipv6 Route Table, and IPv6 Route Advert Spin Lock.
• Net to Physical: Displays a page containing the IP Net to Physical Table, which is used for mapping from IP address to physical address.

Single Switch IP

This page provides general single switch IP information and configuration, including IP Version, IP Capability, and IP Platform.

The page also has the following subpages:

• IPMS: Displays the Switch Single IPMS Table, which contains information about the member switches that belong to the single IP management group.
• Candidate Switches: Displays the Switch Single IP Candidate Switches Table.
• IP Group: Displays tables with single IP group information.
• Zone Defense: Displays tables for the configuration of zone defense rules.

POE Group

This page displays the POE group configuration and information for the POE group.

POE Interface

This page displays tables for the POE interface configuration, including POE Interface Config Table, POE Interface Status Table, POE Interface Measurement Table, and POE Interface PD Alive Config Table.

BGP

This page displays BGP general information and a table for the BGP Global Setting.

The page also has the following subpages:

• BGP Peers: Displays the BGP Peer Table and the Switch BGP Peer Table for BGP peer configuration.
• BGP Peers AF: Displays the BGP Peer AF Table for BGP peer AF configuration.
• BGP Peers Group: Displays tables for BGP groups information and configuration.
• BGP Route: Displays the BGP Route Table.
• BGP Dampening Config: Displays parameters for the BGP damping configuration.
• BGP Network: Displays a table with BGP network addresses.
• BGP Aggregate: Displays a table with BGP aggregate addresses.
• BGP 4: Displays the BGP 4 Path Attribute Table.

IMBP

This page displays the IMBP Global configuration parameter and the IMBP Interface Config Table.

The IMBP Violation page button displays parameters for the IMBP violation configuration and a table with the IMBP Violation Log.

SNMP

This page displays general configuration parameters for switch SNMP, including SNMP Services, SNMP Local Engine ID, and SNMP Global Settings.

The page also contains the following subpages:

• Access Control: Displays tables that are used for the configuration of SNMP access, including SNMP Community Table, SNMP Group Table, SNMP Host Table, and SNMP User Table.
• Context Mapping: Displays the SNMP Context Mapping Table.
• SNMP Trap: Displays SNMP trap settings and the SNMP Trap Interface Configuration Table.

OSPF

This page contains general information regarding the Open Shortest Path First (OSPF) protocol.

The page also contains the following subpages:

• OSPF Area: Displays a page containing the OSPF Area and Stub Area table. The Area table displays the configured parameters and cumulative statistics of the attached areas of the router. The Stub Area table contains the set of metrics that is advertised by a default Area Border Router in a stub area.
• OSPF LSDB: Displays the LSDB table, which displays information about the Link State Database of the OSPF process.
• OSPF Host: Displays a page containing the Host table, which displays the metrics of the hosts, which the router will advertise as host routes.
• OSPF Interface: Displays a page containing the Interface, Interface Metric, and Virtual Interface tables.
• OSPF Neighbor: Displays a page with the OSPF Virtual Neighbor and OSPF Neighbor tables.

Physical Port Interface

This page contains tables regarding the physical port interface information and packet monitoring.

Spanning Tree

This page displays the spanning tree global settings and STP Extension Port information.

Stacking Topology

This page contains general settings related to stacking topology, including Box ID, Admin, Preempt, etc.

VLAN

This page contains tables and parameters for the general settings of the VLAN.

The page also contains the following subpages:

• Port VLAN: Displays a Port VLAN Interface Control Table.
• MAC VLAN: Displays tables for the MAC VLAN configuration.

LLDP

This page displays general LLDP configuration parameters, including LLDP Forward, LLDP Trap, and LLDP Clear Global Stats, etc.

The page also contains the following subpages:

• LLDP Port: Displays LLDP port configuration tables.
• LLDP VLAN: Displays tables for the LLDP VLAN configuration.

SNTP

This page displays SNTP general configuration parameters and the SNTP Server Table.

DHCP

This page displays DHCP Relay Agent configuration parameters as well as the Relay Option 82 configuration parameters.

The page also contains the following subpages:

• DHCP Relay: Displays parameters and a table with DHCP relay information.
• DHCP Relay Option 82: Displays parameters and a table with DHCP Relay Option 82 information.
• Pool Relay: Displays DHCP Pool Relay tables, including the DHCP Pool Class Relay Target Table, DHCP Pool Relay Destination Table, and DHCP Pool Relay Source Table.
• DHCP Agent Interface: Displays tables for configuring the DHCP Agent Interface, including the DHCP Interface Info Policy Table and DHCP Interface Agent Info Trust Table.
• DHCP Agent Control: Displays tables for configuring the DHCP Agent Interface Control, including the DHCP Interface Agent Info State Control and DHCP Interface Agent Info Check Table.
• DHCP Agent Insert: Displays tables for configuring the DHCP Agent Interface Insert, including the DHCP Interface Agent Info Insert and DHCP interface Agent Info Insert VPN Table.