DEV 1986
This connector can be used to monitor and control the DEV 1986 L-Band Distributing Matrix ARCHIMEDES.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | E.01 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port Number: The port of the connected device (default: 161).
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
General
This page displays general information about the device, including its MAC address, firmware, device type, and number of ports, and the number of inputs and outputs in the matrix.
It also allows you to set the control mode of the device (Local or Remote) and the simultaneous mode.
Important
To be able to set values from the element, Control Mode must be set to Remote.
Matrix
This page contains a matrix control showing the signal flow in the device.
In the lower-right corner, the Crosspoints page button can be used to access the raw table with the connections between the inputs and the outputs in the matrix.
Port
On this page, the Port table is displayed. It contains all the information about the inputs and outputs. You can also configure the input and output information here.
Alarm
On this page, you can see the Number of Errors, Error Description, Trap Enable Mask, Error Enable Mask, and Error Log table.
You can also enable the trap and error mask here.
In the Errors table, you will find an overview of all errors with the corresponding data.
Environment
This page provides information about Power Supplies and Fans, including the number of each of the devices and their status.