DTC PRORXD
The PRORXD is a COFDM receiver decoder with dual optional receive and HD decoding capability. The PRORXD 1RU is available with 2-way or 4-way maximum ratio combining RF inputs, while the 2RU version is available with 6-way or 8-way combination.
About
This protocol can monitor status parameters of a Cobham PRORXD device. It also allows the user to configure global configuration parameters and presets. HTTP requests are used to retrieve the device information.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
HTTP connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP.
- IP port: The IP port of the destination: 80.
- Bus address: If the proxy server has to be bypassed, specify bypassproxy.
Usage
General
This page displays general information on the device, such as the Unit Name, H264 Software Version/Serial Number, Build Number and CPU Temperature.
It is possible to create an image of the current spectrum of antennas A and B of the device, for the channels 1 to 8. For this to work, the Thumbnail Status has to be set to Enabled. Also, a Grid.jpg file has to be placed in the following location: C:\Skyline DataMiner\Documents\DTC PRORXD
Status
This page displays status parameters of the Demodulator, Genlock and ASI.
Services
This page displays the status of the Services 1 and 2. It also contains the Service List names.
Global Settings
On this page, you can view and configure the global configuration parameters: General, Downconverter, IP, Streaming, OSD Settings and Genlock settings.
Configuration
On this page, you can view and configure the Presets, in the tables General Configuration, IFB and Decoder and Demodulator Configuration.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.