Dell Equallogic
This connector allows you to monitor the Dell Equallogic disk array. Information from the disk array is retrieved via SNMP. Traps can be retrieved if this is enabled on the device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product
How to use
The element consists of the data pages detailed below.
General
This page displays general information about the device, like its name, location, etc. Page buttons provide access to additional information about the NTP server, DNS server, SysLog server, SMTP server, RADIUS authentication, emails used for alerts, and admin account.
Storage
This page displays information related to the storage group, i.e., the information of each group, compatibilities, and status.
Member
This page displays information about the configuration, health and storage of a member. It also provides access to subpages with detailed temperature information, FAN details, detailed chassis information, power supply information, RAID information, information about hardware components, and cache statistics.
Disk
This page displays disk-related statistics and errors. A page button provides access to a page with smart info for each disk.
Controller
This page contains status information about each controller. A page button provides access to a page with status information about the backplane.
IP Address
This page contains information about the IP address entries and interfaces. The IF States page button displays interface status information, while the INET Addr Entry page buttons displays IP-related address information.