Digigram IQOYA XLINK
IQOYA X/LINK is a 1U-rack streamlined IP audio codec designed for live remote broadcasting and program distribution over IP. It is a perfect fit for delivering a stereo source (or two mono sources) over IP networks for STL and SSL link, DVB audio, WEB radio, and also full-duplex live remote broadcasts.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x | - Fixed Table Display keys - Fixed Discreet Priority (Receivers Priority) |
1.0.0.1 | Updates may be needed for filters, automation scripts, visual overviews, reports, web API. |
| 1.0.2.x [SLC Main] | Set Multicast address via HTTP | 1.0.1.1 | New HTTP connection must be configured for existing elements. |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 03.03b006 |
| 1.0.1.x | 03.03b006 |
| 1.0.2.x | 03.05e001 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | No | Yes | - | - |
| 1.0.2.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
HTTP Connection (1.0.2.x onwards)
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: 443.
- Device address: The bus address of the device. If the proxy server has to be bypassed, specify BypassProxy.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element has the following data pages:
General: Displays general system parameters such as the Serial Number, Firmware Version and Device Name.
The Network subpage displays information about the Ethernet Interfaces and the VLAN Interfaces.
Encoder: Contains Encoder Programs information.
The Service 1 subpage displays information about the service 1 available in the device.
Decoder: Displays information about the Decoder Programs.
The Receivers Priority subpage displays information about the receivers. It allows you to filter the receiver priorities for the program index 1.
From range 1.0.1.x onwards, additional pages are available that make the connector more similar to the web interface: the Receive, Send and Audio pages.
The Display All "Table Name" toggle buttons allow you to select if unused table entries should be hidden. If this toggle button is disabled, only the active table entries are displayed.
From range 1.0.2.x onwards, an Receive configuration page is available, containing the HTTP authentication parameters and a toggle button to enable/disable the Multicast HTTP set.