Double D Electronics DDA219-733
This connector monitors the activity of a Double D Electronics DDA219-733 switch controller. It uses serial communication and makes use of the "Printable ASCII" communication protocol. You can both check information from the device in the connector and control the switch configuration.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- Direct connection:
- Baudrate: Baudrate specified in the manual of the device.
- Databits: Databits specified in the manual of the device (default: 7).
- Stopbits: Stopbits specified in the manual of the device (default: 1).
- Parity: Parity specified in the manual of the device (default: Even).
- FlowControl: FlowControl specified in the manual of the device.
- Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
General
This page displays information about the Software Version, the Device Name, the Maximum of Switches Supported and the number of Main Chains Supported.
It also allows you to set the Control Mode (Remote or Local) and the Global Device Mode (Auto or Manual).
In addition, you can view the state of the Alarms and the Chains connections, and there is a button to Acknowledge the alarms.
The Chain Status subpage displays the Connection, the Alarm Inputs, a Low Power Alarm, an Auxiliary Input Alarm and the Muted state of the chains supported by the device.
Switches
This page displays information about the Status, the Position, the Locked state and the Alarm of the different switches of the device.
On the subpages, you can change the Position of the switches.