ETL Systems 23198 - e278
This connector can be used to monitor an ETL Systems 23198 switch device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | Unknown |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default value: public).
- Set community string: The community string used when setting values on the device (default value: private).
Initialization
No extra configuration is needed.
Redundancy
No extra configuration is needed.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The connector uses the SNMP protocol to retrieve data from the device.
The General page displays configuration parameters, the current Channel and the 2 PSU Status.
The Switch Counters page displays the position counters.