ETL Systems 2776
The ETL Systems 2776 is a DC-LNB power supply.
About
This is an SNMP connector that can be used to poll the device for its current hardware status, including the temperature and the status of the power supply and LNB power supply.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | Yes | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 1.2 e131 |
Installation and configuration
Creation
SNMP Device connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page contains the main information and status of the device, i.e., its Name, current Uptime and Temperature.
Power Supply
This page contains a table with status information for each of the power supplies. The table lists the name, Status and Actual Voltage of each PSU.
LNB Power Supply
This page contains a table with status information for each of the LNB power supplies. For each LNB PSU, the table lists the name, Status, Actual Voltage and Actual Current, and allows you to set the voltage (high, low or off) and tone (on or off).
Web Interface
This page displays the webpage of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.