EVS IP Director

With this connector it is possible to monitor EVS IP Director devices with SNMP.

About

The EVS IP Director will monitor the EVS IP Director device.

Installation and configuration

Creation

The EVS IP Director is an SNMP and serial connector. The SNMP connection is used to monitor the product status, while the serial connection will be used to monitor the Jobs using the SOAP interface.

SNMP CONNECTION:

• IP address/host: The polling IP of the device, e.g., 10.11.12.13.

SNMP Settings:

• Port number: The port of the connected device, by default 161.
• Get community string: The community string in order to read from the device. The default value is public.
• Set community string: The community string in order to set to the device. The default value is private.

SERIAL CONNECTION:

• IP address/host: The polling IP of the device, e.g., 10.11.12.13.
• IP port: The port of the connected device, default value: 9002.

Usage

EVS Product Page

This page displays some general info regarding the device:

• System Name
• System Location
• Status

EVS Product Agent Page

On this page, you can find tables with information regarding the modules.

EVS Product Management Page

On this page, you can find the Event Log table.

EVS Job Monitoring Page

On this page, you can find the Job tables with all the cached jobs. If you click the button View History in one of the rows, the history for that job will be filled in in the History Table below.

For the serial communication to work, you must first click the Authentication page button and fill in the logon credentials.

Web Interface Page

On this page, you can find the web interface of the device.