Eddystone Broadcast RMU
The Eddystone Broadcast RMU enabled FM transmitters can enable your network operations center and authenticated engineers to remotely view and manage any transmitter system.
About
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 4.0.4612.24969 |
| 1.0.1.x | 4.0.4612.24969 |
| 1.1.0.x | 5.6.7310.16328 |
Configuration
Connections
SNMP main connection
This connector uses an SNMPv1 connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMPv1 Settings (1.0.0.x):
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use (1.0.0.x)
The element created with this connector consists of the following data pages:
- General: Displays general system information as well as the IRMU device information. Also allows you to configure general device settings.
- Inputs/Outputs/Sensors/Exciters/Amplifiers/Triggers: These pages contain information about the Boolean inputs, Boolean outputs, sensors, exciters, transmitters, amplifiers, and triggers, respectively
- Web Interface: Displays the web interface of the polling IP address.