Elber RK1000
The Elber RK1000 connector can be used by broadcast operators in transmission networks for the DVB-ASi signal distribution over satellite or terrestrial networks as well in studio environments for the routing or the distribution of SDI/HD/3G-SDI/DVB-ASI signals. This connector is composed by a basic 3U 19" chassis that can host up to 10 hot-swappable modules, allowing an easy maintenance and stock management.
About
This connector exports connectors of type CO02 and creates elements for each card in it's chassis. Data is polled via SNMP and traps are used.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Exported connectors
| Exported Connector | Description |
|---|---|
| Elber RK1000 - CO02 | Used for the CO02 module. |
Installation and configuration
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device. [e.g., 10.10.15.1]
SNMP Settings:
- Port number: The port of the connected device. [default: 161]
- Get community string: The community string used when reading values from the device. [default: public]
- Set community string: The community string used when setting values on the device. [default: private]
Usage
Modules
This page contains the Modules Info Table. This table contains all the cards and offers the ability to display these cards or make them invisible. The page button Modules [DEL] contains a table with the cards that have been removed from the chassis. In case a card broke and has to be removed from the chassis then this card is moved to this table. When a new card of the same type is plugged in then this will move back. This ensures that trending/alarming history is not deleted. If you do not want to keep this history you can delete this card in the Modules Info [DEL] table.
General
This page contains the general parameters: e.g., Customer Name, Customer Location, ...
Controller
This page contains the parameters for the controller. This page is divided in the status parameters, the alarm parameters, the configuration parameters and the network configuration parameters. e.g., Controller Status PSU 1 Voltage, Controller Config Date Time, Controller Config Network Ip Address, etc.
Traps
This page contains all the traps.
Web Interface
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.
Supported cards
CO02
The CO02 card is a plug in board for the RK1000/A; DVB-ASI, 3G-SDI change-over, 3 inputs and 7 outputs (last-selected input loop-through), with matrix function.