Emerson Chloride 80-NET
The Emerson Chloride 80-NET connector monitors and allows the configuration of critical parameters of the Emerson Chloride 80-NET UPS device.
About
This connector polls information from the device via SNMP. This includes device information and the status of main parameters and alarms.
Additionally, the connector also allows you to perform the basic configuration of the UPS (input and output voltage, frequency and startup/shutdown of the UPS).
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | V1.04.110606 |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default: public.
- Set community string: The community string used when setting values on the device, by default: private.
Usage
General Page
This page display generic information related to the device, such as the Mode, Manufacturer, Serial Number, etc.
Status Page
This page displays the status of the battery: the Voltage, Current, Estimated Battery Life and Temperature.
In addition, extra information about the Input and Output power (per line) is displayed.
Control Page
On this page, you can control the startup, (auto)restart and shutdown of the UPS.
Configurations Page
On this page, you can configure the input/output parameters of the UPS: Voltage, Frequency and Power.
Alarms page
This page displays the alarms generated by the device.
Web interface
This page allows access to the web interface of the device. However, note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.