Enensys InverTS
This connector retrieves and monitors data from the device. The Enensys InverTS is a DVB-T2 Gateway reverse function designed to receive up to two T2-MI streams over satellite, ASI or IP, containing either a single PLP or multiple PLP, and capable of de-encapsulating the T2-MI streams into one or several MPEG-2 TS over ASI and IP.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | SNMP connection | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.1.2 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The connector allows you to configure general parameters such as Date Time, Device Name, Device Location, Network Interfaces and Alarms.
It is also possible to configure the Network Interfaces. Specifically, you can update parameters like the Speed, Duplex mode, IPv4 Address, Netmask and Gateway.
In the Current Alarms table, you can find the Component, Root Time, Severity and a brief Description of each alarm.
On separate pages, you can find the configuration of Inputs and Outputs for both T2-MI streams.
- For the inputs, you can configure the Piping, Main/Backup Input and BISS. You can also find information about the ASI and SAT bitrates.
- For the outputs, you can configure the following parameters: Extraction, ASI Out State, ASI Out Optimize, ASI Out Bitrate, ASI Out Mirrored State.