Eutelsat Probe Service

This is an enhanced service protocol that allows more efficient alarm monitoring of the parameters included in the service.

About

Version Info

Range	Key Features	Based on	System Impact
1.0.0.x	Initial version	-	-

System Info

Range	DCF Integration	Cassandra Compliant	Linked Components	Exported Components
1.0.0.x	No	Yes	-	-

Configuration

Connections

Virtual Connection

This connector uses a virtual connection and does not require any input during element creation.

Initialization

It is possible to create alarms based on parameter values or based on alarm states. In that case, you need to configure the inputs, outputs and thresholds on the Compare Values page.

It is also possible to create alarms based on alarm states. In that case, you need to configure the input and output on the Compare Alarms page.

For more information on how the alarms are generated, refer to the section below.

How to Use

When the Compare Values option is used, you can configure two input (A and B) and two output (X and Y) parameters.

Alarms will be generated based on the following conditions: - if (max(A, B) - min(A, B)) / max(A, B) > threshold a - if (max(X, Y) - min(X, Y)) / max(X, Y) > threshold a - if (max(A, X) - min(A, X)) / max(A, X) > threshold b or (max(A, Y) - min(A, Y)) / max(A, Y) > threshold c - if (max(B, X) - min(B, X)) / max(B, X) > threshold b or (max(B, Y) - min(B, Y)) / max(B, Y) > threshold c

Alarms will be generated based on the following conditions for two inputs (A, B) and one output (X): - if (max(A, B) - min(A, B)) / max(A, B) > threshold a - if (max(A, X) - min(A, X)) / max(A, X) > threshold b - if (max(B, X) - min(B, X)) / max(B, X) > threshold c

When the Compare Alarms option is used, you will receive alarms based on the following table:

Output 1	Output 2	Input 1	Input 2	Alarm Severity	Alarm Description
Critical	Critical	Critical	Critical	Critical	Loss of outputs and inputs
Critical	Critical	Critical	Normal	Critical	Loss of outputs and input 1
Critical	Critical	Normal	Critical	Critical	Loss of outputs and input 2
Critical	Critical	Normal	Normal	Critical	Loss of outputs
Critical	Normal	Critical	Critical	Critical	Loss of output 1 and inputs
Critical	Normal	Critical	Normal	Major	Loss of output 1 and input 1
Critical	Normal	Normal	Critical	Major	Loss of output 1 and input 2
Critical	Normal	Normal	Normal	Major	Loss of output 1
Normal	Critical	Critical	Critical	Critical	Loss of output 2 and inputs
Normal	Critical	Critical	Normal	Major	Loss of output 2 and input 1
Normal	Critical	Normal	Critical	Major	Loss of output 2 and input 2
Normal	Critical	Normal	Normal	Major	Loss of output 2
Normal	Normal	Critical	Critical	Critical	Loss of inputs
Normal	Normal	Critical	Normal	Major	Loss of input 1
Normal	Normal	Normal	Critical	Major	Loss of input 2

Notes

This connector was created specifically for Eutelsat.