Evertz 7707CVT
The Evertz 7707CVT-X is an analog video fiber transmitter for broadcast-quality video signals. X stands for the number of inputs.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- Device address: Indicate if required or not. If it is, specify default value and range.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
How to use
The element created with this connector will have 5 data pages. The General page contains the most important status parameters. Next to this, there is an Audio and Video page. On the Faults page, you can make the device send traps in certain situations. The Configuration page contains information about the slot and master jumper.