Evertz 7707GPS-DR-F2
This connector can be used to manage the Evertz 7707GPS-DR-F2 card. It communicates using SNMP and has filtered polling per card based on subtables.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Device address: The slot number of the card in the frame.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
Make sure the Evertz 7X00 Frame Controller connector is also available in the system, as full functionality of this connector, with frame status parameters such as temperature and power supply, will not be available otherwise.
Redundancy
This platform does not support controller interface redundancy.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The connector will communicate with the frame but will only poll information for the card slot defined during element creation.
All tables are polled via SNMP. Traps are supported.