Evertz 7707LTA
The Evertz 7707LTA is a fiber-optic transmitter that converts L-band RF signals into fiber-optic output signals at various wavelengths, including 1310 nm, 1550 nm, CWDM, and DWDM
This connector is used to monitor and configure 7707LTA cards using SNMP communication.
About
Version Info
| Range | Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | Evertz 7707LTA Version 1.0.3 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 161).
- Device address: The card slot.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
This connector uses SNMP to retrieve information from the card. It displays the information on the pages and allows you to perform changes on it.
Trap Logging
This page lists all the received traps in the Traps table.
With the Max Traps parameter, you can limit how many traps can be stored in the table.
With the Clear Traps button, you can clear the table completely.