Evertz 7800FC

About

The 7800FC VistaLINK Frame Controller handles all SNMP communication between the frame (7800) and the network manager (NMS), and serves as a gateway to individual cards in the frame.

This connector can be used to monitor and configure the Evertz 7800FC VistaLINK Frame Controller card.

Configuration

Connections

SNMP Main Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

• IP address/host: The polling IP or URL of the destination.
• IP port: The IP port of the destination.

SNMP Settings:

• Get community string: The community string used when reading values from the device (default: public).
• Set community string: The community string used when setting values on the device (default: private).

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to use

This connector displays product location information in a table on the General and Software pages.

On the Product Location page, you can see which slots are used in the system.

On the Hardware page, you can find general information about the status parameters, and on the Hardware LED page, you can find information about the status of the LEDs in the system.

On the Time Management page, you can indicate how the real-time clock should be synced to an external source.

On the SNMP Traps page, you can add and remove trap destinations.

The Trap Management page includes information about the trap status of the various slots in the chassis.